Your original lens is glued on from the factory with a strong adhesive, so you will need some patience to remove the lens and glue without cracking the housing.

Your first option is to break the glass with a small hammer to remove the old glass. Break off all the glass pieces carefully and remove the old glue with a flat screw driver and a razor blade.

CAUTION: Some customers  have cracked the housing while trying to pry off the old glass by putting too much pressure. Keep this in mind if you use too much force the housing will break!!

Refurbishing the old housing:

More than likely the inside of your housing will be discolored; you should take some time to clean it up nicely and spray paint the inside once the old lens off. Keep masking tape, primer and spray paint handy – most customers spray paint the inside of the housing in silver or chrome because of the added reflection.

Once you have removed the old lens, glue and you spray painted your old housing you are ready to glue in the new lens by using a strong waterproof adhesive such as Loctite, 3M etc.

Reference Part Number: 993-631-082-00-LNSManufacturer: HellaNote: Keep in mind the stamps on these are not the same as they were 25 years ago.